1566 Medical Drive

Pottstown, PA  19464

610-326-3235

sales@contecsystems.com

Data Acquisition Software for Continuous Emission Monitoring Systems40 CFR PART 60                                         40 CFR PART 75 (EDR2.2)                                                   NOx BUDGET                                                  40 CFR PARTS 266 & 503

Features - Continuous Emissions & Opacity Monitoring

User Configurable Password Protection at both Manager and Operator levels

Change LOW, HIGH, and HIGH HIGH Alarm Set Points

Select Which “High/High” Alarms Trigger Emissions Incidents

Change Calibration Gas Bottle Values and Input & Output Ranges

Change Allowable Analyzer Drift & Auto System Calibration Time

Select Single or Multiple Daily Calibrations

Set Auto Calibration Time and/or Frequency and All CEM Timing Delays

Change Miscellaneous System Constants Such as F-factor, HHV, etc.

Place an Input Channel In or Out of Service

Manager and Operator can Enter Process and Reason Codes

Manager Can Change the Recorded Values in the Data Base

Allows Manager to Insert Values Into Any Missing Data Periods

Displays 1 Minute, 6 Minute, 15 Minute, 1 Hour and Various Rolling Averages

Trend Raw and Calculated Information

Adjustable X and Y Axis and Update Frequency (1 to 900 seconds)

Adjustable Color Palette

Plots One Minute, Hourly Averages and Calibration Results

Plot Up to 7500 Continuous Data Points

300 Continuous Days When Plotting 1 Hour Averages

5 Continuous Days When Plotting 1 Minute Average

Zoom In and Zoom Out on the User Definable Time Periods

Calculates the Averages of the Trend Between 2 User Definable Points

Generates Reports to Screen, Printer, Floppy Disk, or User Defined Drive

Indicates Bad and Missing Data Periods

6 Minute and 15 Minute Averages

Hourly Averages and Daily Summary

Emission Incidents

Daily Calibration Results

Data Validity and Availability

Monthly, Quarterly Summary Reports, Annual Totals, and Summary Reports